AT-18
A540H
A540H
A540H
SST
A540H
Union
Elbow
Neutral Start Switch
Manual Shift
Lever
AUTOMATIC TRANSAXLE
SEPARATE BASIC SUBASSEMBLY
1.
AT4600
2.
Apply
Gasket
AT4221
3.
Bolt and Washer
AT4222
4.
AT3527
5.
AT3528
-
Removal of Component Parts
(A540H)
REMOVE TRANSFER ASSEMBLY
(a)
Remove the five nuts and three bolts.
(b)
Using a plastic hammer, remove the transfer as-
sembly form the transaxle.
(A540H)
REMOVE APPLY GASKET
(A540H)
REMOVE DIFFERENTIAL SIDE GEAR INTERMEDIATE
SHAFT
(a)
Screw in suitable bolt with washer into the side gear
intermediate shaft.
(b)
Using SST, remove the side gear intermediate
shaft.
SST
09520-32012
REMOVE UNION AND ELBOW
(a)
Using an open end wrench, remove the union and
elbow.
(b)
Remove the O-rings from the union and elbow.
REMOVE NEUTRAL START SWITCH
(a)
Remove the manual shift lever.
(b)
Pry off the lock washer and remove the manual
valve shaft nut.
(c)
Remove the two bolts and pull out the neutral start
switch.