Dell MXL 10GbE Reference Manual page 229

Switch i/o module
Table of Contents

Advertisement

Parameters
protocol-type-
number
destination-
mac-address
mac-address-
mask
any
vlan vlan-id
source-mac-
address mac-
address-mask
count
byte
order
log
threshold-in
msgs count
Access Control Lists (ACL)
Use the no deny ether-type protocol-type-number {destination-
mac-address mac-address-mask | any} vlan vlan-id {source-
mac-address mac-address-mask | any} command.
Enter a number from 600 to FFFF as the specific Ethernet
type traffic to drop.
Enter a MAC address and mask in the nn:nn:nn:nn:nn format.
For the MAC address mask, specify which bits in the MAC
address must match.
The MAC ACL supports an inverse mask; therefore, a mask of
ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
00:00:00:00:00:00 only allows entries that match exactly.
Enter the keyword any to match and drop specific Ethernet
traffic on the interface.
Enter the keyword vlan and then enter the VLAN ID to filter
traffic associated with a specific VLAN. The range is 1 to
4094 and 1 to 2094 for ExaScale ( you can use IDs 1 to
4094). To filter all VLAN traffic, specify VLAN 1.
Enter a MAC address and mask in the nn:nn:nn:nn:nn format.
For the MAC address mask, specify which bits in the MAC
address must match.
The MAC ACL supports an inverse mask; therefore, a mask of
ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
00:00:00:00:00:00 only allows entries that match exactly.
(OPTIONAL) Enter the keyword count to count packets
processed by the filter.
(OPTIONAL) Enter the keyword byte to count bytes
processed by the filter.
(OPTIONAL) Enter the keyword order to specify the QoS
priority for the ACL entry. The range is from 0 to 254 (where
0 is the highest priority and 254 is the lowest; lower order
numbers have a higher priority) If you did not use the
keyword order, the ACLs have the lowest order by default
(255).
(OPTIONAL) Enter the keyword log to enable the triggering
of ACL log messages.
(OPTIONAL) Enter the threshold-in-msgs keyword
followed by a value to indicate the maximum number of ACL
logs that can be generated, exceeding which the generation
229

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxl 40gbe

Table of Contents