Capture Bgp-Pdu Neighbor (Ipv6); Clear Ip Bgp Ipv6-Address - Dell Z9500 Reference Manual

Related
•
Commands
•

capture bgp-pdu neighbor (ipv6)

Enable capture of an IPv6 BGP neighbor packet.
Z9500
Syntax
capture bgp-pdu neighbor ipv6-address direction {both | rx |
tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-
pdu neighbor ipv6-address command.
Parameters
ipv6-address
direction {both
| rx | tx}
Defaults Not configured.
Command
•
Modes
•
Command
Version
History
9.2(1.0)
8.2.1.0
7.5.1.0
Related
•
Commands
•
•

clear ip bgp ipv6-address

Reset BGP sessions specific to an IPv6 address. The soft parameter (BGP Soft Reconfiguration) clears the
policies without resetting the TCP connection.
Z9500
Syntax
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast
{flap-statistics | soft {in | out}} | unicast {flap-statistics
| soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
494
show capture bgp-pdu neighbor
capture bgp-pdu neighbor
Enter the IPv6 address of the target BGP neighbor.
Enter the keyword direction and a direction— either rx
for inbound, tx for outbound, or both.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
clear ip bgp – enables route reflection between route reflector and clients.
show capture bgp-pdu neighbor
capture bgp-pdu neighbor
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.
Border Gateway Protocol