Capture Bgp-Pdu Neighbor (Ipv6); Capture Bgp-Pdu Max-Buffer-Size - Dell Force10 Z9000 Reference Manual

Command Modes ROUTER BGP
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage Peering sessions are reset when you change the router ID of a BGP router.
Information

capture bgp-pdu neighbor (ipv6)

Enable capture of an IPv6 BGP neighbor packet.
C-Series, E-Series
Syntax capture bgp-pdu neighbor ipv6-address direction {both | rx |
tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-pdu
neighbor ipv6-address command.
Parameters
ipv6-address
direction {both |
rx | tx}
Defaults Not configured.
Command Modes
Command History
Version 8.2.1.0
Version 7.5.1.0
Related
Commands

capture bgp-pdu max-buffer-size

Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
C-Series, E-Series
Syntax capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000
466
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address of the target BGP neighbor.
Enter the keyword direction and a direction— either rx for
inbound, tx for outbound, or both.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
• clear ip bgp – enables route reflection between route reflector and clients.
• show capture bgp-pdu neighbor
• capture bgp-pdu neighbor
Enter a size for the capture buffer.
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.