Description - Dell MXL 10GbE Reference Manual

•
•
•
Set Clause with Continue Clause
If the route-map entry contains sets with the continue clause, set actions are
performed first then the continue clause jumps to the specified route map entry.
•
•
Related
set metric
Commands
set automatic-tag

description

Add a description to this route map.
Syntax
description description
Parameters
description
Defaults none
Command ROUTE-MAP
Modes
Command
Version 8.3.16.1
History
Related route-map
Commands
Access Control Lists (ACL)
A successful match with a continue clause, the route map executes the set
clauses and then goes to the specified route map entry upon execution of the
continue clause.
If the next route map entry contains a continue clause, the route map executes
the continue clause if a successful match occurs.
If the next route map entry does not contain a continue clause, the route map
evaluates normally. If a match does not occur, the route map does not
continue and falls through to the next sequence number, if one exists.
If a set action occurs in the first route map entry and then the same set action
occurs with a different value in a subsequent route map entry, the last set of
actions overrides the previous set of actions with the same set command.
If set community additive and set as-path prepend are configure, the
communities and AS numbers are prepended.
— Specifies a COMMUNITY attribute
— Configures a filter to modify the AS path
Enter a description to identify the route map (80 characters
maximum).
Introduced on the MXL 10/40GbE Switch IO Module.
— Enables a route map.
201