Match Tag - Dell MXL 10GbE Reference Manual

Switch i/o module
Table of Contents

Advertisement

Command
Version 8.3.16.1
History
Related
match interface
Commands
match ip address
match ip next-hop
match ip route-source
routers.
match metric

match tag

match tag
To redistribute only routes that match a specified tag value, configure a filter.
Syntax
match tag tag-value
Parameters
tag-value
Defaults
Not configured.
Command
ROUTE-MAP
Modes
Command
Version 8.3.16.1
History
Related
match interface
Commands
match ip address
match ip next-hop
match ip route-source
routers.
match metric
match route-type
206
Introduced on the MXL 10/40GbE Switch IO Module.
— redistributes routes that match the next-hop interface.
— redistributes routes that match an IP address.
— redistributes routes that match the next-hop IP address.
— redistributes routes that match routes advertised by other
— redistributes routes that match a specific metric.
— redistributes routes that match a specific tag.
Enter a value as the tag on which to match. The range is
from zero (0) to 4294967295.
Introduced on the MXL 10/40GbE Switch IO Module.
— redistributes routes that match the next-hop interface.
— redistributes routes that match an IP address.
— redistributes routes that match the next-hop IP address.
— redistributes routes that match routes advertised by other
— redistributes routes that match a specific metric.
— redistributes routes that match a route type.
Access Control Lists (ACL)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxl 40gbe

Table of Contents