Show Spanning-Tree Bridge - Dell PowerConnect J-EX4200-24T Software Manual

show spanning-tree bridge

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show spanning-tree bridge
<brief | detail>
<msti msti-id>
<routing-instance routing-instance-name>
<vlan-id vlan-id>
show spanning-tree bridge
<brief | detail>
<msti msti-id>
<vlan-id vlan-id>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the configured or calculated Spanning Tree Protocol (STP) parameters.
—(Optional) Display brief STP bridge information for all multiple spanning-tree
none
instances (MSTIs).
—(Optional) Display the specified level of output.
brief | detail
—(Optional) Display STP bridge information for the specified MSTI.
msti msti-id
routing-instance routing-instance-name
the specified routing instance.
—(Optional) Display STP bridge information for the specified VLAN.
vlan-id vlan-id
view
show spanning-tree bridge routing-instance on page 1394
show spanning-tree bridge msti on page 1395
show spanning-tree bridge vlan-id (MSTP) on page 1395
show spanning-tree bridge (VSTP) on page 1396
show spanning-tree bridge vlan-id (VSTP) on page 1397
Table 179 on page 1393 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 179: show spanning-tree bridge Output Fields
Field Name
Routing instance name
Enabled protocol
Root ID
Chapter 69: Operational Mode Commands for Spanning-Tree Protocols
—(Optional) Display STP bridge information for
show spanning-tree bridge
Field Description
Name of the routing instance under which the bridge is configured.
Spanning Tree Protocol type enabled.
Bridge ID of the elected spanning tree root bridge. The bridge ID
consists of a configurable bridge priority and the MAC address of
the bridge.
command.
1393