Calculate[1]|2|3|4:Feed[1]|2 <String - Agilent Technologies N1911A Programming Manual

CALCulate[1]|2|3|4:FEED[1]|2 <string>
This command sets the input measurement mode to be fed to the specified
input on the CALC block. It is applied to the measurement after the
CALC:MATH:EXPR command has been used to specify which channel the
feed is taken from.
Measurement modes are coupled for combination measurements (for
example, ratio measurements). For example, if one feed is changed to
PTAV, the other is automatically changed to PTAV.
Under certain circumstances the measurement mode is changed by the
CALC:MATH:EXPR command. Refer to
"CALCulate[1]|2|3|4:MATH[:EXPRession] <string>"
information.
Syntax
N1911A/1912A P-Series Power Meters Programming Guide
CALC :FEED
1
2
3
4
Space
string
1
2
?
CALCulate Subsystem
on page 189 for further
3
165