Agilent Technologies N1911A Programming Manual page 482

10 SENSe Subsystem
Example
SENS:TRAC:AUT
SENS2:TRAC:AUT
Reset Condition
On reset, X Start = 0 s, X Scale = 10 ms, Y Max = 20 dBm, Y Scale = 7 dB.
Error Messages
• If no sensor or wrong sensor is connected to the channel, error –241
• If channel is not in trigger acquisition mode, error –221 "Settings
454
"Hardware missing" occurs.
conflict" occurs.
This command triggers the Auto Scaling
for Channel A.
This command triggers the Auto Scaling
for Channel B.
N1911A/1912A P-Series Power Meters Programming Guide