Agilent Technologies N1911A Programming Manual page 198

3 CALCulate Subsystem
Example
CALC2:GAIN 20
Reset Condition
On reset, the display offset is set to 0 dB (DEF).
Query
CALCulate[1]|2|3|4:GAIN[:MAGNitude]? [MIN|MAX]
The query returns the current setting of the display offset or the value
associated with MIN and MAX.
Query Example
CALC1:GAIN?
Error Message
If CALCulate[1]|2|3|4:GAIN[:MAGNitude] is set to ON while
SENSe:SPEed is set to 200, error –221, "Settings Conflict" occurs.
170
This command enters a display offset of
20 dB to the lower window/lower
measurement.
This command queries the current setting
of the display offset on the upper
window/upper measurement.
N1911A/1912A P-Series Power Meters Programming Guide