Pstatistic:ccdf:reference:data - Agilent Technologies N1911A Programming Manual

PSTatistic:CCDF:REFerence:DATa?

This command is used to retrieve the reference trace data and it is
independent of the channel attached. The reference trace data will be
returned only if there is a reference trace saved.
This command is only applicable when P-Series sensors are present and the following
N O T E
conditions are met:
• Free-run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
The reference trace data returned in the format as shown below:
N O T E
• The reference trace data maximum X-axis value in dB
• 501 points of the reference trace data
Syntax
Example
PST:CCDF:REF:DAT?
Reset Condition
On reset, the trace will be cleared.
N1911A/1912A P-Series Power Meters Programming Guide
PST
:CCDF
:REF
:DAT
This command returns the previously
saved reference trace data.
PSTatistic Subsystem
?
9
321