12
SYSTem Subsystem
SYSTem:COMMunicate:LAN:CURRent:SMASk?
This command returns the current setting of the LAN subnet mask in use
by the power meter.
If DHCP or AutoIP are successfully enabled, then one of these IP address modes assign the
N O T E
LAN subnet mask, otherwise it is the static LAN subnet mask.
Syntax
Example
SYST:COMM:LAN:CURR:SMAS?
500
:COMM
:LAN
SYST
:SMAS
:CURR
This command queries the current setting
of the LAN subnet mask.
N1911A/1912A P-Series Power Meters Programming Guide
?