[Sense[1]]|Sense2:Correction:dcycle|Gain3:State <Boolean - Agilent Technologies N1911A Programming Manual

[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3:STATe
<boolean>
This command is used to enable and disable the pulse power measurement
feature.
The [SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3 command should be
used to enter the duty cycle of the signal you want to measure.
Syntax
SENS
SENS2
Example
CORR:DCYC:STAT 1
Reset Condition
On reset, the pulse power measurement feature is disabled.
Query
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3:STATe?
The query enters a 1 or 0 into the output buffer indicating the status of
the pulse power measurement feature.
N1911A/1912A P-Series Power Meters Programming Guide
:
1 CORR
:DCYC :STAT
:GAIN3
This command enables the pulse
measurement feature on Channel A.
SENSe Subsystem
Space
0|OFF
1|ON
?
401
10