Pstatistic:ccdf:reference[:State] <Boolean - Agilent Technologies N1911A Programming Manual

PSTatistic:CCDF:REFerence[:STATe] <boolean>
This command is used to turn on or off the reference trace and it is
independent of the channel attached.
This command is only applicable when P-Series sensors are present and the following
N O T E
conditions are met:
• Free-run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
• Expanded window is enabled (not full CCDF screen window)
Syntax
Example
PST:CCDF:REF ON
PST:CCDF:REF OFF
Reset Condition
On reset, the reference trace will be cleared.
N1911A/1912A P-Series Power Meters Programming Guide
PST
:CCDF
:STAT
:REF
This command turns on the previously
saved reference trace.
This command turns off the previously
saved reference trace.
PSTatistic Subsystem
Space
0|OFF
1|ON
?
9
323