Measure[1]|2|3|4[:Scalar][:Power:ac]? [<Expected_Value>[,<Resolution>[,<Source List>]]] - Agilent Technologies N1911A Programming Manual

2 MEASurement Commands
MEASure[1]|2|3|4[:SCALar][:POWer:AC]?
[<expected_value>[,<resolution>[,<source list>]]]
This command sets the specified window's measurement function to single
channel with relative mode off, aborts, configures the window then
initiates Channel A or B, calculates the measurement result and places the
result on the bus.
Syntax
MEAS
1
2
3
4
Parameters
Refer to
parameters in this command.
148
:POW
:SCAL
Space expected_value
DEF
"Optional Parameters"
Item Description/Default
expected_value A numeric value for the expected power level.
(for the expected The units of measurement are dBm and W.
power level) The default units are defined by
UNIT:POWer.
resolution A numeric value for the resolution. If
unspecified the current resolution setting is
used.
:AC ?
,
resolution
on page 90 for additional details on the
N1911A/1912A P-Series Power Meters Programming Guide
,
source list
DEF
Range of Values
sensor dependent
1
DEF
2
1 to 4
1.0, 0.1, 0.01, 0.001
1
DEF