Table 12-49 Radar: Power Meter Presets: Window/Measurement Settings - Agilent Technologies N1911A Programming Manual

Command
TRIG[:SEQ]:HOLD
1
Range
[SENS[1]]|SENS2:POW:AC:RANG:AUTO
[SENS[1]]|SENS2:POW:AC:RANG
Step detection
[SENS[1]]|SENS2:AVER:SDET
Trace setup
[SENS[1]]|SENS2:TRAC:OFFS
:TIME <numeric_value>
[SENS[1]]|SENS2:TRAC:TIME
<numeric_value>

Table 12-49 RADAR: Power Meter Presets: Window/Measurement Settings

Function
Display setup
Upper window
Lower window
Window/measurement setup
Upper window/upper measurement (UU)
Feed
Measurement
Upper window/lower measurement (UL)
Feed 1
Feed 2
Measurement
N1911A/1912A P-Series Power Meters Programming Guide
1
The Range setting in Table 12-48
power sensor (excluding Option CFT).
Setting
MIN
OFF
UPPER
0
–250 ns
1.5 µs
is only applicable for E-Series power sensor and N8480 Series
Setting
Single Channel
Channel A trace
Dual numeric
Gate 1 Channel A
Pk-to-Avg
Gate 2 Channel A - Avg
Feed 1/ Feed 2
SYSTem Subsystem
Comments
Trigger holdoff
Auto range off
Range set to upper
Step detection disabled
Delay between delayed trigger point
and the start of the trace
Length of the trace
Dual Channel
See Table 12-50
Dual numeric
See Table 12-50
See Table 12-50
See Table 12-50
See Table 12-50
See Table 12-50
12
559