17
IEEE 488.2 Command Reference
*RCL <NRf>
The *RCL <NRf> (ReCaLl) command restores the state of the power meter
from the specified save/recall register. An instrument setup must have
been stored previously in the specified register.
Syntax
Parameters
Error Message
• If the register does not contain a saved state, error –224, "Illegal
748
Space
*RCL
Type
Description/Default
NRf
The number of the register to be recalled.
parameter value" occurs.
NRf
N1911A/1912A P-Series Power Meters Programming Guide
Range of Values
1 - 10