[Sense[1]]|Sense2:Temperature - Agilent Technologies N1911A Programming Manual

10 SENSe Subsystem

[SENSe[1]]|SENSe2:TEMPerature?

This this command to returns the P- Series power sensor's temperature in
degrees Celsius.
Syntax
Parameters
Example
SENS2:TEMP?
Reset Condition
On reset, this parameter is not affected.
442
:
SENS 1
SENS2
Item Description/Default
numeric_value A numeric value defining sensor's temperature
in degrees Celsius.
: TEMP
?
This command returns the current sensor
temperature found on Channel B.
N1911A/1912A P-Series Power Meters Programming Guide
Range of Values
–50 to 100