Table 12-88 Lte: Power Meter Presets: Window/Measurement Settings - Agilent Technologies N1911A Programming Manual

Command
[SENS[1]]|SENS2:POW:AC:RANG:AUTO
[SENS[1]]|SENS2:POW:AC:RANG
Step detection
[SENSe[1]]|SENS2:AVER:SDET
Trace setup
[SENS[1]]|SENS2:TRAC:OFFS
:TIME <numeric_value>
[SENS[1]]|SENS2:TRAC:TIME
<numeric_value>

Table 12-88 LTE: Power Meter Presets: Window/Measurement Settings

Function
Display setup
Upper window
Lower window
Window/measurement setup
Upper window/upper measurement (UU)
Feed
Measurement
Upper window/lower measurement (UL)
Feed
Measurement
Lower window/upper measurement (LU)
Feed
Measurement
Lower window/lower measurement (LL)
N1911A/1912A P-Series Power Meters Programming Guide
1
The Range setting in Table 12-87
power sensor (excluding Option CFT).
Setting
OFF
UPPER
0
–0.2 ms
m
11.0 s
is only applicable for E-Series power sensor and N8480 Series
Setting
Single Channel
Channel A trace
Dual numeric
N/A
N/A
N/A
N/A
Gate 1 Channel A
Avg
SYSTem Subsystem
Comments
Auto range off
Range set to upper
Step detection is disabled
Delay between delayed trigger point
and the start of the trace
Length of the trace
Dual Channel
*
Primary channel trace
See Table 12-89
N/A
N/A
N/A
N/A
See Table 12-89
See Table 12-89
12
603