Agilent Technologies N1911A Programming Manual page 439

Example
SENS1:DET:FUNC NORM
Reset Condition
On reset, the mode is set to NORMal.
Query
[SENSe[1]]|SENSe2:DETector:FUNCtion?
The query returns the current sensor mode setting.
Query Example
SENS:DET:FUNC?
Error Messages
• If the command is used when a non E9320 or N1920 sensor is
N1911A/1912A P-Series Power Meters Programming Guide
connected, the error –241, "Hardware missing" occurs.
This command sets the sensor to peak
mode for Channel A.
This command queries the current sensor
mode setting for Channel A.
SENSe Subsystem 10
411