[Sense[1]]|Sense2:Trace:time <Numeric_Value - Agilent Technologies N1911A Programming Manual

[SENSe[1]]|SENSe2:TRACe:TIME <numeric_value>
This command sets the duration of the trace for a P- Series sensor and a
E9320 sensors set to NORMal mode. To set the E9320 sensor to NORMal
mode, refer to the command
<character_data>"
Syntax
Parameters
Example
SENS2:TRAC:TIME 0.5
N1911A/1912A P-Series Power Meters Programming Guide
on page 410.
:
1
SENS
SENS2
Item Description/Default
numeric_value The duration of the trace in seconds.
•
Units are resolved to 1 ns.
"[SENSe[1]]|SENSe2:DETector:FUNCtion
:TIME
TRAC
DEF: the default value is 100 µs.
This command sets the duration of the
trace to 0.5 seconds for Channel B.
SENSe Subsystem
Space
numeric_value
DEF
?
Range of Values
20 ns to 1 s
DEF
10
447