Operation Register Sets - Agilent Technologies N1911A Programming Manual

Operation Register Sets

The following registers contain information which is part of the power
meter's normal operation. The contents of the individual registers of these
register sets may be accessed by appending the commands listed in
"Status Register Set
The following command descriptions detail the SCPI register you require
to control but do not detail the Register Set commands.
The seven Operation Register Sets are:
STATUS:OPERation
STATus:OPERation:CALibrating[:SUMMary]
STATus:OPERation:LLFail[:SUMMary]
STATus:OPERation:MEASuring[:SUMMary]
STATus:OPERation:SENSe[:SUMMary]
STATus:OPERation:TRIGger[:SUMMary]
STATus:OPERation:ULFail[:SUMMary]
Further information on these register sets is provided on the following
pages.
N1911A/1912A P-Series Power Meters Programming Guide
Commands".
STATus Subsystem 11
475