Agilent Technologies N1911A Programming Manual page 261

upper and lower windows are DIGital.
Query
DISPlay:[WINDow[1]|2]:FORMat?
The query returns the current format of the selected window.
Query Example
DISP:FORM?
Error Messages
• If the command is set to TRACe and the selected channel from which
• If the command is set to TRACe and the selected channel has a
• If the command is set to TRACe ( for dual channel, at either
N1911A/1912A P-Series Power Meters Programming Guide
TRACe is taken has no sensor connected or has on a sensor other than
a P- Series or E9320 power sensor connected, error –241, "Hardware
missing" occurs.
P- Series or E9320 power sensor connected in AVERage measurement
mode, the error –221, "Settings conflict" occurs.
measurement channel) when the P- Series or E9320 sensor is connected
in normal mode and SENse:BUFFer:COUNt or
SENse:FREQuency:STEP is more than 1, error –221, "Settings
conflict" occurs.
This command queries the current format
of the upper window.
DISPlay Subsystem
233
5