Status:operation:measuring[:Summary] - Agilent Technologies N1911A Programming Manual

STATus:OPERation:MEASuring[:SUMMary]

The operation status measuring summary register set contains information
on the measuring status of the power meter.
The following bits in these registers are used by the power meter:
These bits are set when the power meter is taking a measurement.
These bits are cleared when the measurement is finished.
Syntax
N1911A/1912A P-Series Power Meters Programming Guide
Bit Number Decimal
Weight
0 -
1 2
2 4
3-15 -
STAT :OPER
Definition
Not used
Channel A MEASuring Status
Channel B MEASuring Status (N1912A only)
Not used
:MEAS :SUMM
STATus Subsystem 11
479