Display[:Window[1]|2]:Format <Character_Data - Agilent Technologies N1911A Programming Manual

DISPlay[:WINDow[1]|2]:FORMat <character_data>
This command selects the format of the selected window.
Syntax
• This command has the same purpose as
N O T E
• This command does not allow the setting set to TRACe when either measurement
N1911A/1912A P-Series Power Meters Programming Guide
DISP :WIND
DISPlay[:WINDow[1]|2]:ANALog:LOWer <numeric_value>.
channel (for dual channel) is configured to initiate external trigger buffering.
1 :FORM
2
DISPlay Subsystem
Space character_data
?
5
231