Trace[1]|2:Measurement:transition[1]|...|10:Positive:duration - Agilent Technologies N1911A Programming Manual

13 TRACe Subsystem
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:DURa
tion?
This command returns the n
trace.
Syntax
TRAC
Reset Condition
On reset, this parameter is not affected.
Example
Error Messages
• If a P- Series sensor is not connected, error –241, "Hardware missing"
• If a P- Series sensor is connected and Free Run trigger acquisition is
632
:MEAS
1
2
TRAC:MEAS:TRAN10:POS:DUR? This command returns the 10th positive
occurs.
selected, error –221, "Settings conflict" occurs.
th
positive transition duration found on a
1
:TRAN
2|...|10
transition duration found on trace 1.
N1911A/1912A P-Series Power Meters Programming Guide
:POS :DUR
?