Trace[1]|2:Measurement:instant:reference? <Numeric_Value - Agilent Technologies N1911A Programming Manual

13 TRACe Subsystem
TRACe[1]|2:MEASurement:INSTant:REFerence?
<numeric_value>
This command returns the time instant at which the power waveform
intersects the reference level supplied as the command parameter. This
allows the time instant used to calculate the pulse parameters to be found.
It also allows calculation of transition between non- standard reference
levels.
This command is only applicable when P-Series power sensors are used with single or
N O T E
continuous triggered acquisition is selected.
Syntax
Parameters
618
TRAC
:MEAS
1
2
Item Description/Default
numeric_value Reference level in percentage
:INST :REF
N1911A/1912A P-Series Power Meters Programming Guide
? Space
numeric_value
Range of
Values
–
25 to 125