Pstatistic[1]|2:Ccdf:store:reference - Agilent Technologies N1911A Programming Manual

9 PSTatistic Subsystem

PSTatistic[1]|2:CCDF:STORe:REFerence

This command is used to store Channel A or Channel B as a reference
trace for CCDF graph window.
The trace will be saved as reference trace in volatile RAM.
N O T E
This command is only applicable when P-Series sensors are present and the following
N O T E
conditions are met:
• Free-run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
• Expanded window is enabled (not full CCDF screen window)
Syntax
Example
PST:CCDF:STOR:REF
PST2:CCDF:STOR:REF
342
1
PST
:CCDF
2
:STOR
This command saves the Channel A trace
as reference trace.
This command saves the Channel B trace
as reference trace.
N1911A/1912A P-Series Power Meters Programming Guide
:REF