Service:sensor[1]|2:Power:usable:maximum - Agilent Technologies N1911A Programming Manual

15 SERVice Subsystem

SERVice:SENSor[1]|2:POWer:USABle:MAXimum?

This query returns the maximum power that can be accurately measured
by the currently connected sensor. It is applicable to E- Series sensors
only. Maximum power information is stored in the sensor's EEPROM.
Syntax
Example
SERV:SENS1:POW:USAB:MAX? This query returns the maximum power
Error Messages
• If no sensor is connected, error –241, "Hardware missing" occurs.
• If a a sensor other than an E- Series sensor is connected, error –241
• If the E- Series sensor currently connected does not contain the
722
SERV
:SENS
"Hardware missing" occurs.
necessary information in EEPROM, error –241 "Hardware missing"
occurs.
:POW
1 :USAB
2
that can be accurately measured by the
E- Series sensor currently connected to
Channel A.
N1911A/1912A P-Series Power Meters Programming Guide
:MAX ?