Pstatistic:ccdf:marker[1]|2:X <Numeric_Value - Agilent Technologies N1911A Programming Manual

PSTatistic:CCDF:MARKer[1]|2:X <numeric_value>
This command is used to set the current marker X- axis position at the
selected trace.
This command is only applicable when P-Series sensors are present and the following
N O T E
conditions are met:
• Free-run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
• Expanded window is enabled (not full CCDF screen window)
Syntax
PST
Parameters
N1911A/1912A P-Series Power Meters Programming Guide
:CCDF
Item Description/Default
numeric_value
The current marker X-axis position
• Maximum Value: 50 dB. The value will be
1
The marker will be placed at the point nearest to the specified X-axis position if that particular X
value is not available.
1
:MARK : X
2
set to 0 if negative value is inserted.
PSTatistic Subsystem
Space
numeric_value
Range of Values
1 < 50
.
9
317