[SENSe[1]]|SENSe2:TRACe:OFFSet:TIME <numeric_value>
This command sets the delay between the delayed trigger point and the
start of the trace for P- Series or E9320 sensors are set to NORMal mode.
To set an E9320 sensor to NORMal mode, refer to the command
"[SENSe[1]]|SENSe2:DETector:FUNCtion <character_data>"
Syntax
SENS
SENS2
Parameters
Example
SENS:TRAC:OFFS:TIME TIME
0.05
N1911A/1912A P-Series Power Meters Programming Guide
:
1
TRAC
Item
Description/Default
numeric_value
The length of the delay in seconds.
•
Units are resolved to 1 ns.
:OFFS
:TIME
DEF: the default value is 0 seconds
This command sets the delay to 0.05
seconds.
SENSe Subsystem
on page 410.
Space
numeric_value
DEF
?
Range of Values
–1 to 1 second
DEF
10
445