Pstatistic:ccdf:marker[1]|2:Y <Numeric_Value - Agilent Technologies N1911A Programming Manual

PSTatistic:CCDF:MARKer[1]|2:Y <numeric_value>
This command is used to set the current marker Y- axis position at the
selected trace.
This command is only applicable when P-Series sensors are present and the following
N O T E
conditions are met:
• Free-run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
Syntax
Parameter
N1911A/1912A P-Series Power Meters Programming Guide
PST
:CCDF
Item
numeric_value
1
The marker will be placed at the point nearest to the specified Y-axis position if that particular Y
value is not available.
1
:MARK
2
Description/Default
The current marker Y-axis position
• Minimum Value: 0 %
• Maximum Value: 100 %
PSTatistic Subsystem
Space
:Y
numeric_value
Range of Values
1 0 to 100
.
9
319