11
STATus Subsystem
Questionable Register Sets
The questionable register sets contain information which gives an
indication of the quality of the data produced by the power meter. The
contents of the individual registers in these register sets may be accessed
by appending the commands listed in
The following command descriptions detail the SCPI register you require
to control but do not detail the register set commands.
The three questionable register sets are:
STATus:QUEStionable
STATus:QUEStionable:CALibration[:SUMMary]
STATus:QUEStionable:POWer[:SUMMary]
484
"Status Register Set
N1911A/1912A P-Series Power Meters Programming Guide
Commands".