Agilent Technologies N1911A Programming Manual page 226

3 CALCulate Subsystem
The query returns a 1 or 0 into the output buffer.
• 1 is returned when relative mode is enabled
• 0 is returned when relative mode is disabled
Query Example
CALC1:REL:STAT?
Error Message
If CALCulate:RELative:STATe is set to ON while SENSe:SPEed is set to
200, error –221, "Settings Conflict" occurs.
198
This command queries whether relative
mode is off or on for the upper
window/upper measurement.
N1911A/1912A P-Series Power Meters Programming Guide