System:communicate:lan:current:dname - Agilent Technologies N1911A Programming Manual

SYSTem:COMMunicate:LAN:CURRent:DNAMe?

This command returns the current setting of the LAN domain name in use
by the power meter.
If DHCP or AutoIP are successfully enabled, then one of these IP address modes assign the
N O T E
LAN domain name, otherwise it is the static LAN domain name.
Syntax
Example
SYST:COMM:LAN:CURR:DNAM?
N1911A/1912A P-Series Power Meters Programming Guide
:COMM :LAN
SYST
:DNAM
:CURR
This command queries the current setting
of the LAN domain name.
SYSTem Subsystem
?
12
499