System:communicate:lan:current:dgateway - Agilent Technologies N1911A Programming Manual

12 SYSTem Subsystem

SYSTem:COMMunicate:LAN:CURRent:DGATeway?

This command returns the current setting of the LAN IP router/gateway
address in use by the power meter.
If DHCP or AutoIP are enabled and successful, then one of these IP address modes assigns
N O T E
the LAN IP router/gateway address, otherwise it is the static LAN IP router/gateway
address
Syntax
Example
SYST:COMM:LAN:CURR:DGAT?
498
:COMM :LAN
SYST
:DGAT
:CURR
This command queries the current setting
of the LAN IP router/gateway address.
N1911A/1912A P-Series Power Meters Programming Guide
?