Output Subsystem - Agilent Technologies N1911A Programming Manual

N1911A/1912A P-Series Power Meters
Programming Guide
8

OUTput Subsystem

OUTPut Subsystem
OUTPut:RECorder[1]|2:FEED <data_handle>
OUTPut:RECorder[1]|2:LIMit:LOWer <numeric_value>
OUTPut:RECorder[1]|2:LIMit:UPPer <numeric_value>
OUTPut:RECorder[1]|2:STATe <boolean>
OUTPut:ROSCillator[:STATe] <boolean>
OUTPut:TRIGger[:STATe] <boolean>
This chapter explains how the OUTput command subsystem is used to
switch the POWER REF output on and off.
292
299
301
303
Agilent Technologies
293
295
297
291