Output:recorder[1]|2:State <Boolean - Agilent Technologies N1911A Programming Manual

OUTPut:RECorder[1]|2:STATe <boolean>
This command enables or disables the specified recorder output.
Syntax
Example
OUTP:REC1:STAT 1
Reset Condition
On reset, the recorder output is OFF.
Query
OUTPut:RECorder[1]|2:STATe?
The query command enters a 1 or 0 into the output buffer indicating
whether or not the specified recorder is switched on.
• 1 is returned when the recorder output is switched ON
• 0 is returned when the recorder output is switched OFF
N1911A/1912A P-Series Power Meters Programming Guide
OUTP
:REC
:STAT
1
2
This command enables the specified
recorder output.
OUTput Subsystem
Space
0|OFF
1|ON
?
8
299