System:communicate:lan:dhcp[:State] <Boolean - Agilent Technologies N1911A Programming Manual

SYSTem:COMMunicate:LAN:DHCP[:STATe] <boolean>
Syntax
Example
Query
Query Example
This command enables the dynamic host configuration protocol.
:COMM
SYST
SYST:COMM:LAN:DHCP ON
SYSTem:COMMunicate:LAN:DHCP?
• 1 is returned if DHCP is enabled
• 0 is returned if DHCP is disabled
SYST:COMM:LAN:DHCP?
:DHCP
:LAN
This command enables the DHCP.
This command queries the state of the
DHCP.
Space
:STAT
0|OFF
1|ON
?