FORMat[:READings]:BORDer <character_data>
This command controls whether the binary data is transferred in normal
or swapped Byte ORDer. It is only used when
FORMat[:READings][:DATA] is set to REAL.
Syntax
Parameters
Example
FORM:BORD SWAP
Reset Condition
On reset, this value is set to NORMal.
N1911A/1912A P-Series Power Meters Programming Guide
:READ
FORM
Item
Description/Default
character_data
Byte order of binary data transfer:
•
•
Space
:BORD
NORMal
SWAPped
This command sets the byte order to
swapped.
FORMat Subsystem
character_data
?
Range of Values
NORMal
SWAPped
6
251