Measure[1]|2|3|4[:Scalar][:Power:ac]:Difference? [<Expected_Value>[,<Resolution>[,<Source List>]]] - Agilent Technologies N1911A Programming Manual

2 MEASurement Commands
MEASure[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence?
[<expected_value>[,<resolution>[,<source list>]]]
This command applies to the N1912A power meter only, as it needs two
measurement channels to make sense.
This command sets the specified window's measurement function to
difference mode with relative mode off, aborts, configures then initiates
both Channel A and B, calculates the difference measurement result and
places the result on the bus. The result is a power based measurement
and is expressed in the units defined by UNIT[1]|2|3|4:POWer.
Syntax
MEAS
1
2
3
4
Parameters
Refer to
parameters in this command.
152
:POW
:SCAL
expected_value
Space
DEF
"Optional Parameters"
Item Description/Default
expected_value The power meter ignores the numeric value
(for the expected entered in this parameter. Any value entered is
power level) treated like DEF.
:AC :DIFF
,
resolution
DEF
on page 90 for additional details on the
N1911A/1912A P-Series Power Meters Programming Guide
?
,
source list
Range of Values
sensor dependent
1
DEF