9
PSTatistic Subsystem
PSTatistic[1]|2:CCDF:POWer? <numeric_value>
This command is used to return the power level at the specified
probability.
This command is only applicable when P-Series sensors are present and the following
N O T E
conditions are met:
• Free run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
Syntax
Parameters
Example
PST1:CCDF:POW? 30
338
1
PST
2
Item
numeric_value
:POW
:CCDF
Description/Default
The probability at the queried
power.
• Maximum value: 0 %
• Minimum value: 100 %
This command queries the power level at
probability of 30 %.
N1911A/1912A P-Series Power Meters Programming Guide
?
space
numeric_value
Range of Values
0.0 to 100