Agilent Technologies N1911A Programming Manual page 730

15 SERVice Subsystem
Reset Condition
On reset, the signal is disabled.
Query
SERVice:BIST:TBASe:STAT?
The query enters a 1 or 0 into the output buffer indicating the status of
the 10 MHz time base testing.
• 1 is returned when the signal is enabled
• 0 is returned when the signal is disabled
Query Example
SERV:BIST:TBASe:STAT?
702
This command queries whether the test is
enabled or disabled.
N1911A/1912A P-Series Power Meters Programming Guide