[Sense[1]]|Sense2:Correction:cfactor|Gain[1][:Input][:Magnitude] <Numeric_Value - Agilent Technologies N1911A Programming Manual

10 SENSe Subsystem
[SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN[1][:INPut][:M
AGNitude] <numeric_value>
This command is used to enter a gain correction value for the calibration
factor. The power meter corrects every measurement by this factor to
compensate for the gain.
Either CFACtor and GAIN1 can be used in the command—both have an
identical result. Using GAIN1 complies with the SCPI standard, whereas
CFACtor does not—this may make your program easier to understand.
Syntax
SENS
SENS2
388
:
1 CORR :GAIN 1
:CFAC
Space
N1911A/1912A P-Series Power Meters Programming Guide
:INP
:MAGN
numeric_value
DEF
MIN
MAX
Space
? MIN
MAX