Table 10-23Measurement Units; Sense[1]|2:Trace:limit:lower <Numeric_Value - Agilent Technologies N1911A Programming Manual

SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value>
This command sets the lower scale limit of the trace for the specified
channel.
The units used are dependent on the current setting of SENS:TRAC:UNIT
as shown in

Table 10-23Measurement Units

The trace lower scale limit is maintained at a lower power than the upper scale limit which
N O T E
is adjusted to be slightly greater than the lower scale limit if necessary. Refer to
"SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>"
on setting the trace upper scale limit.
Syntax
:SENS
N1911A/1912A P-Series Power Meters Programming Guide
Table 10-
Units:
SENS:TRAC:UNIT
dBm
W
:TRAC
1
2
23.
Units:
SENS:TRAC:LIM:LOW
dBm
W
:LOW
:LIM
SENSe Subsystem
on page 458 for further information
Space
numeric_value
DEF
MIN
MAX
Space
?
10
MIN
MAX
455