Trace[1]|2:Measurement:transition[1]|...|10:Negative:duration - Agilent Technologies N1911A Programming Manual

13 TRACe Subsystem
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:DUR
ation?
This command returns the n
trace.
Syntax
TRAC
Reset Condition
On reset, this parameter is not affected.
Example
Error Messages
• If a P- Series sensor is not connected, error –241, "Hardware missing"
• If a P- Series sensor is connected and Free Run trigger acquisition is
628
:MEAS
1
2
TRAC:MEAS:TRAN8:NEG:DUR?
occurs.
selected, error –221, "Settings conflict" occurs.
th
negative transition duration found on a
:TRAN
1
2|...|10
This command returns the 8th negative
transition duration found on trace 1.
N1911A/1912A P-Series Power Meters Programming Guide
:DUR
:NEG
?