Making Measurements On Wireless Communication Standards - Agilent Technologies N1911A Programming Manual

1 Power Meter Remote Operation

Making Measurements on Wireless Communication Standards

The following sections describe typical measurements you may want to
make. They are also described, for front panel operation, in the user's
guide.
The optimum method of measuring these Wireless Communication
Standards is to use the SYSTem:PRESet <character_data> command and
use one of the following values.
• GSM900 - See
• EDGE - See
• CDMAone - See
• CDMA2000 - See
• WCDMA - See
• BLUetooth - See
• MCPa - See
• RADar - See
• WL802DOT11A - See
• WL802DOT11B - See
• XEVDO - See
• XEVDV - See
• TDSCdma - See
• NADC - See
• IDEN - See
• DVB - See
• HIPERLAN2 - See
84
"GSM900"
"EDGE"
"CDMAone"
"CDMA2000"
"W- CDMA"
"BLUetooth"
"MCPA"
"RADAR"
detail.
"1xeV- DO"
"1xeV- DV"
"TD- SCDMA"
"NADC"
"iDEN" on page 581 for greater detail.
"DVB" on page 585 for greater detail.
"802.11a and HiperLan2"
detail.
on page 533 for greater detail.
on page 536 for greater detail.
on page 540 for greater detail.
on page 544 for greater detail.
on page 548 for greater detail.
on page 552 for greater detail.
on page 555 for greater detail.
on page 558 for greater detail.
"802.11a and HiperLan2"
"892.11b/g" on page 565 for greater detail.
on page 568 for greater detail.
on page 571 for greater detail.
on page 574 for greater detail.
on page 577 for greater detail.
N1911A/1912A P-Series Power Meters Programming Guide
on page 562 for greater
on page 562 for greater