Agilent Technologies N1911A Programming Manual page 313

Syntax
MEM
Parameters
Example
MEM:TABL:SEL "Sensor_1"
MEM:TABL:GAIN 97,99.5,97.4
Query
MEMory:TABLe:GAIN[:MAGNitude]?
The query returns a list of calibration factor/offset points for the currently
selected table.
N1911A/1912A P-Series Power Meters Programming Guide
:TABL
Item Description/Default
numeric_value A numeric value for the calibration/ offset
factors. The units are PCT.
:GAIN :MAGN
This command enters a reference
calibration factor of 97 % and calibration
factors of 99.5 % and 97.4 % into the
sensor calibration table.
MEMory Subsystem
,
Space
numeric_value
?
Range of Values
1.0 to 150.0
7
285