Calculate[1]|2|3|4:Gain[:Magnitude] <Numeric_Value - Agilent Technologies N1911A Programming Manual

CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric_value>
This command is used to enter a value for the display offset on the
specified window/measurement. The display offset is applied to the
measurement signal after any math calculation.
Entering a value using this command automatically turns the
CALCulate[1]|2|3|4:GAIN:STATe command to ON.
Syntax
CALC
Parameters
N1911A/1912A P-Series Power Meters Programming Guide
:GAIN
1
2
3
4
Item Description/Default
numeric_value A numeric value for the display offset:
•
•
•
:MAGN
DEF: the default value is 0 dB
MIN: –100.000 dB
MAX: +100.000 dB
CALCulate Subsystem
Space
numeric_value
DEF
MIN
MAX
Space
?
Range of Values
–100.000 to +100.000 dB
DEF
MIN
MAX
3
MIN
MAX
169