[Sense[1]]|Sense2:Average2:Count <Numeric_Value - Agilent Technologies N1911A Programming Manual

10 SENSe Subsystem
[SENSe[1]]|SENSe2:AVERage2:COUNt <numeric_value>
This command is used to enter the video filter length for the P- Series and
E9320 sensor. Video filtering is applied to the traces. Successive traces are
combined to reduce noise without affecting the dynamic characteristic of
the signal.
Syntax
SENS
SENS2
Parameters
1
Example
AVER2:COUN 16
374
:
1 AVER2
Item Description/Default
numeric_value A numeric value defining the filter length.
•
This is only implemented in powers of 2 (2
:COUN
DEF: the default value is 4.
n
).
This command enters a video filter length
of 16 for Channel A.
N1911A/1912A P-Series Power Meters Programming Guide
Space
numeric_value
DEF
?
Range of Values
1 to 256
DEF
1